The YiHi SXmini SL Class Mod is a compact device that uses a single 18650/20700/21700 battery (not included) with a maximum output of 100 watts. The stylish mod is powered by the Yihi SX485J processor, outputting a maximum of 100 watts. It features bypass (mechanical) mode with protection and has a TFT color display at the front of the device. Navigating the menu is simple thanks to the joystick control. You can also fully customize the YiHi SXmini SL Class Mod with the SXi-Q control system, allow you to set your own taste, logo, and menu name.

The device has full temperature control support and can read atomizers as low as 0.05 ohm and as high as 3.0 ohms. Output voltage is 0.7 volts to 9.5 volts, while output in Joule mode is 10 joules to 100 joules. The SL Class Mod measures 89mm long, 41.5mm wide, and 31.5mm tall.

Along with five configurable SXi-Q taste modes, there are also Powerful+, Powerful, Standard, Soft, Eco, and Novice. Like other YiHi-SXmini devices, the SL Class Mod has upgradeable firmware. Safety features include reverse polarity, short protection, low resistance, low battery voltage, overheating, and battery over-charge protection.

Contents
1x YiHi-SXmini SL Class (battery not included)
1x USB Cable
1 x 18650 Adapter Sleeve
1x User Manual
1x Warranty Card
1x Warning Card

Features
YiHi SX485J Processor
Single 18650/20700/21700 device (battery not included)
Maximum Output: 100 watts
Bypass Mode
TFT Color Display
Joystick Control
Measurements: 89mm x 41.5mm x 31.5mm
Temperature Control (SS/Ti/Ni): 212-572°F / 100-300°C
SXi-Q Control System: customize taste, logo, and menu name
Output Joule: 10J to 100J
Resistance: 0.05 to 3.0 ohms
Output Voltage: 0.7 to 9.5V
Taste Modes: Powerful+, Powerful, Standard, Soft, Eco, Novice, and SXi-Q-S1 to S5
Upgradeable Firmware